Application of 3D printing percutaneous guide plate in closed reduction and cannulated screw internal fixation of femoral neck fracture / 中国骨伤

OBJECTIVE@#To investigate the application of 3D printing percutaneous surgical guide plate in closed reduction and cannulated screw internal fixation of femoral neck fracture.@*METHODS@#The clinical data of 12 patients with femoral neck fracture from March 2019 to March 2022 were retrospectively analyzed. Patients were divided into observation group and control group according to different operation plans, with 6 cases in each group. The observation group received percutaneous operation guide plate assisted closed reduction and hollow screw internal fixation, while the control group received closed reduction and hollow compression screw internal fixation. The operation time, intraoperative blood loss, fluoroscopy times, and Kirschner needle puncture times were compared between two groups. The location of screws were recordedon postoperative X-ray films, follow-up time, time of complete fracture healing, Harris score of hip joint and the incidence of complications were recorded on postoperative X-ray films.@*RESULTS@#The operation time of observation group (32.17±6.18) min was shorter than that of control group (53.83±7.31) min (P<0.05). The amount of intraoperative bleeding in the observation group (18.33±2.94) ml was less than that in the control group (38.17±5.56) ml(P<0.05). The times of fluoroscopy in the observation group (7.50±1.05) were less than those in the control group (21.00±4.82) (P<0.05). The number of Kirschner needle punctures (8.00±0.63) in observation group was less than that in control group (32.67±3.08) (P<0.05). The follow-up time was(12.88±0.74) months in observation group and (12.83±0.72) months in control group, there was no significant difference between two groups (P>0.05). One year after operation, Harris score of hip joint in the observation group was(82.00±4.52) points, while that in the control group was(81.00±3.41) points, there was no significant difference between two groups(P>0.05). The time of complete fracture healing in the observation group was (7.50±1.05) months, while that in the control group was (7.67±1.21) months, there was no significant difference between two groups(P>0.05). The parallelism of the screws in the observation group was (0.50±0.11) ° and (0.76±0.15) °, which were lower than that in the control group (1.57±0.31) ° and (1.87±0.21) ° (P<0.05). The screw distribution area ratio (0.13±0.02) cm2 in the observation group was higher than that in the control group (0.08±0.01) cm2 (P<0.05). No complications such as necrosis of femoral head, nonunion of fracture, shortening of femoral neck and withdrawal of internal fixation occurred in both groups.@*CONCLUSION@#The application of 3D printing percutaneous surgical guide plate improves the accuracy and safety of closed reduction and cannulated screw internal fixation for femoral neck fracture. It has the advantages of minimally invasive, reducing radiation exposure, fast and accurate, shortening the operation time and reducing intraoperative bleeding.

Modificación del cabezal de micromotor para una nueva guia quirurgica de implantes: estudio de caso / Modification of the micromotor head for a new surgical guide for implants: a case study

RESUMEN Las guías quirúrgicas son dispositivos indispensables para la adecuada colocación de los implantes dentales, siendo la guía quirúrgica generada por ordenador la más precisa, su plano guía está a nivel de la fresa conformadora, esta nueva guía quirúrgica tiene el plano guía a nivel del cabezal del micromotor, es restrictiva en sentido mesiodistal y vestíbulo/palatino-lingual, tiene la ventaja que no interfiere con la refrigeración de la fresa, se adapta a todos los sistemas de implantes, no requiere kits adicionales. Para la fabricación de dicha guía se debe modificar el cabezal del micromotor adicionándole un elemento que le permitirá tener 3 paredes unidas en ángulo de 90 grados, y sobre este se posicionará el riel guía el cual dirigirá la fresas conformadoras del lecho óseo en el grosor óseo del reborde alveolar que la tomografía y la planificación reversa indiquen. En 8 pacientes que requirieron un implante se utilizó la guía propuesta, y a otros 8 se les colocó el implante con la técnica a mano alzada. La guía propuesta mostró desviaciones que fueron de 0 mm a 0,61 mm; las desviaciones con la técnica a mano alzada estuvieron en el rango de 0,58 a 1,56 mm. Estadísticamente no hubo diferencia significativa. La ventaja principal de esta guía es que permite la refrigeración adecuada de la fresa formadora del lecho para el implante, no requiere nuevo kit quirúrgico, es compatible con cualquier sistema; dentro de las desventajas, es que este cabezal debe fabricarse para cada marca de micromotor, aunque el riel guía puede ser el mismo.

ABSTRACT Surgical guides are essential devices for the proper placement of dental implants, being the computer generated surgical guide the most precise, its guide plane is at the level of the shaping drill, this new surgical guide has the guide plane at the level of the head of the micromotor, it is restrictive in the mesiodistal and vestibule / palatine-lingual directions, it has the advantage that it does not interfere with the cooling of the drill, it adapts to all implant systems, it does not require an additional kit. For the manufacture of said guide, the head of the micromotor must be modified by adding an element that will allow it to have 3 walls joined at a 90-degree angle, and on this the guide rail will be positioned, which will direct the shaping drills of the bone bed in the bone thickness of the alveolar ridge indicated by tomography and reverse planning. In 8 patients who required an implant, the proposed guide was used, and in another 8 the implant was placed with the freehand technique. With the proposed guide, it showed deviations that ranged from 0 mm to 0.61 mm; The deviations with the freehand technique were in the range of 0.58 to 1.56 mm. Statistically there was no significant difference. The main advantage of this guide is that it allows adequate cooling of the implant bed-forming drill, a new surgical kit is not required, it is compatible with any system; Among the disadvantages is that this head must be manufactured for each brand of micromotor, although the guide rail may be the same.

The influence of the maxillary sinus on maxillary posterior tooth endodontic microsurgery / 口腔疾病防治

@#Endodontic microsurgery is one effective method for preserving teeth affected by periapical disease, and is also an essential technique for treating difficult cases. However, due to the restricted operating space at the posterior site and the proximity of the root apex to the maxillary sinus, endodontic surgery in the posterior maxillary area represents great challenges. This article summarizes the anatomical relationship between the maxillary sinus and the maxillary posterior teeth, the influence on endodontic microsurgery, and the application of assistive techniques on maxillary posterior teeth, such as 3D-printed surgical guides and ultrasonic osteotomes. Literature review results show that the spatial relationship between the apex of maxillary posterior teeth and the maxillary sinus is usually divided into three categories: the apex enters the maxillary sinus; the apex contacts the bottom of the maxillary sinus; and there is a distance between the apex and the bottom of the maxillary sinus. CBCT should be performed before the operation, and the periapical state of the tooth and the maxillary sinus and the distance between the lesions and the sinus floor should be considered to evaluate the difficulty of the operation. Meanwhile, during surgery, equipment such as surgical guides, endoscopes and ultrasonic osteotomes should be used to ensure that the operation is safer, reliable, precise and less invasive, but the clinical popularity of ultrasonic osteotomes still needs further promotion. Moreover, high-quality clinical studies on the long-term effects of micro-apical surgery in the posterior maxillary area are still lacking.

"Cirugía guiada de implantes inmediatos, utilizando la técnica Socket Shield"

RESUMEN: Este informe clínico describe el tratamiento rehabilitador realizado a un paciente con fracturas horizontales de ambos incisivos centrales superiores, mediante la colocación de implantes inmediatos, utilizando una guía quirúrgica y la técnica Socket Shield. Después de un año de seguimiento, no se observan alteraciones clínicas de los tejidos duros y blandos, manteniéndose una alta estética. La cirugía guiada junto a la técnica Socket Shield es un enfoque de tratamiento prometedor para la rehabilitación con implantes de la zona anterior.

ABSTRACT: This clinical report describes the restorative treatment performed on a patient with horizontal fractures on both upper central incisors, by placing immediate implants using both surgical guide and the Socket Shield technique. After one year of monitoring, no clinical hard or soft tissues alterations were observed, maintaining high aesthetics. Guided surgery together with Socket Shield technique is a promising treatment approach for anterior implant rehabilitation.

Microcirugía endodóntica con planificación digital y guía quirúrgica: caso clínico / Endodontic microsurgery with digital planning and surgical guide: a clinical case

La microcirugía endodóntica (MCE) es una alternativa al tratamiento no quirúrgico de la periodontitis apical persistente. Por su evolución junto a los avances tecnológicos, la incorporación de la tomografía computarizada de haz cónico (CBCT), la tecnología de impresión tridimensional (3D) y las guías quirúrgicas diseñadas con software asistido por computadora, han permitido implementar la planificación digital llevada a cabo en el acto quirúrgico. El objetivo de este informe es describir un caso clínico de MCE guiada, con un protocolo de diseño digital y el uso de una guía quirúrgica impresa en resina biocompatible, diseñada con precisión de acuerdo con las mediciones de CBCT preoperatorias. Se diseñó un kit de trefinas con "sleeves" (Neokings) para realizar la osteotomía y resección de los últimos 3 mm apicales direccionados por la guía quirúrgica. La tabla cortical intacta se recuperó y se utilizó como injerto junto con plasma rico en fibrina. La guía de cirugía apical permite al profesional lograr ubicar con precisión los tejidos objetivos de la cirugía y acortar el tiempo del procedimiento. Un control CBCT inmediato mostró la planificación exacta en 3D del sitio quirúrgico (AU)

Digital workflow of immediate implant-supported restoration for atrophic edentulous patients / 口腔疾病防治

@#Rehabilitation and reconstruction of atrophic edentulous predicament represents significant challenges for implant dentists due to the anatomical conditions of the edentulous jaw. Implant-supported fixed complete dental prostheses represent a scientifically and clinically validated treatment for recovering patients, masticatory function and esthetic effect. However, the highly demanding implant surgical techniques and complex rehabilitation procedures for immediate functional reconstruction make it difficult to achieve the desired treatment outcomes. The application of digital and CAD/CAM technology in various stages of the treatment process is logical for patients and dentists. This article summarizes the workflow of digital-assisted implantation with immediate functional reconstruction of atrophic edentulous combined with a clinical case. Digital-assisted diagnosis, design, implantation, immediate reconstruction and final rehabilitation can optimize the implant surgery and immediate rehabilitation workflow, improve the accuracy of implant-supported immediate functional reconstruction, reduce the demand for a large amount of bone graft, and achieve higher patient satisfaction. The “prosthetic-oriented, begin with the end in mind” concept of edentulous jaw implant prosthetics can accurately and efficiently restore the patient,s beauty and chewing function in a minimally invasive manner, and is worthy of clinical promotion.

Application of three-dimensional printed digital surgical guide in the anterior maxillary dental implant / 中国组织工程研究

BACKGROUND: Conventional implantation at anterior aesthetic region is difficult to achieve ideal three-dimensional position, and needs high implantation accuracy. OBJECTIVE: To evaluate the clinical application effect of three-dimensional printed digital guide technology in anterior dental implant. METHODS: Eighty-six cases of dental implants were divided into two groups. Control group (n=43, 52 implants) received conventional dental implantation. Trial group (n=43, 52 implants) received implantation under three-dimensional printed digital guides. The accuracy of the three-dimensional position of the implants was measured. The modified plaque index, modified bleeding index, probing depth and the satisfaction of patients with implant denture were measured at 6 months after implantation. RESULTS AND CONCLUSION: (1) The errors of vertical and horizontal directions at the top and the root after implantation in the trial group were significantly fewer than those in the control group (P < 0.05). (2) The modified plaque index, modified bleeding index, and probing depth in the trial group were significantly lower than those in the control group (P < 0.05). (3) The satisfaction of patients in the trial group was 98% (42/43), which was higher than 86% (37/43) in the control group. (4) In summary, three-dimensional printed digital guide plate used in dental implant dentures can improve the three-dimensional position accuracy after implantation and improve the postoperative clinical effect.

Research advances in the use of digital surgical guides in implantology / 华西口腔医学杂志

Dental implants have become the main choice for patients to fill in their missing teeth. A precise placement is the basis for a functional and aesthetic restoration. A digital surgical guide is a carrier that transfers the preoperative plan of dental implants to the actual surgery. This paper provides some references that can help clinicians improve the accuracy of implant surgery by stating the development, classification, advantages and disadvantages, and factors that affect the accuracy of digital guides.

Preliminary application of three dimensional printing surgical guide plate in orthognathic surgery for partial mandibular deformities / 中华医学美学美容杂志

Objective To evaluate the effectiveness of computer aided design (CAD) and three bit printing in the management of orthognathic surgery.Methods A total of 5 cases of patients with jaw deformity were involved in this study;jaw teeth and CT scanning laser scanning hefore surgery,virtual surgery design of 3D reconstruction and fusion data were analyzed,according to the design scheme of double jaw surgery combined with genioplasty;design and 3D printing of maxillary Le Fort Ⅰ osteotomy,genioplasty titanium alloy resin osteotomy and positioning guide,sagittal split ramus osteotomy by 3D printing and plate technology were used in this approach.The postoperative results were compared with the surgical planning by three-dimensional measurement and statistical analysis.Results When the operation guide plate was applied smoothly,the maximum error for maxilla was 1.2 mm (0.3-1.2 mm),and the maximum error for genioplasty was 1.7 mm,(0.5-1.7 mm),and the mean error was less than 1 mm.Follow-up for 12 months showed no adverse reaction.Conclusions Three dimensional printing surgical guide plate can accurately provide the osteotomy information,effectively control the jaw movement,and improve the orthognathic surgery accuracy of patients with partial jaw deformity.

The Use of Customised Surgical Guide for Bilateral Inferior Mandibulectomy in a Case of Monostotic Fibrous Dysplasia

@#Fibrous dysplasia (FD) is a benign pathological condition of bone in which normal cancellous bone is replaced by immature woven bone and fibrous tissue. Surgical recontouring aims to remove the excess fibrous bone and achieve acceptable symmetry. Conventional surgery which depends on visual exposure and the surgeon’s assessment during the procedure poses a great challenge in obtaining a predictable surgical outcome especially in bilateral presentation. Recent advances in surgical technology may overcome this challenge. Herein, we present a case of 23 years old Chinese lady who underwent bilateral inferior mandibulectomy for monostotic fibrous dysplasia. The aims of this surgery were to recontour the mandible symmetrically via extraoral approach while preserving the inferior alveolar nerves and mental nerves with the aid of a surgical guide. A stereolithography model of the patient’s mandible was produced using the computed tomography (CT) scan data in Digital Imaging and Communications in Medicine (DICOM) format to assist in the surgery. Simulation with SurgiCase software (Materialise, Leuven, Belgium) was utilised in creating the customised surgical guide. The autoclavable surgical guide was manufactured by rapid prototyping technology and used intraoperatively to define the osteotomy line for mandibular recontouring. Virtual surgical planning greatly assists surgeons to deliver a good surgical result.

Progress in clinical application of 3D printed navigational template in orthopedic surgery / 南方医科大学学报

Orthopedic 3D printed surgical navigational template is an instrument that is prepared by 3D reconstruction based on preoperative radiological data of the patient using computer-aided design (CAD) and 3D printing techniques. The 3D printed navigational template allows accurate intra-operative assessment of the relative spatial distance, angular relationship, direction and depth. The application of 3D printed navigational template technique in orthopedics surgeries achieves the conversion of preoperative planning from 2/3D graphics to 3D models, and provides a new method for individualized and precise treatment. Herein we review the evolution, clinical application, and basic classification of 3D printed navigation template technique, analyze its advantages and disadvantages, and discuss the current problems and the future development of this technique.

Application of digital positioning guide plate in extraction of impacted supernumerary teeth / 南方医科大学学报

OBJECTIVE@#To explore the application of digital positioning guide plate in extraction of impacted supernumerary teeth and evaluate its clinical efficacy.@*METHODS@#From March to August, 2019, 30 patients with labial impacted supernumerary teeth treated in the Department of Oral and Maxillofacial Surgery, Stomatological Hospital, Southern Medical University were enrolled in this study. Fifteen of the patients were treated with digital positioning guide plate to remove the impacted supernumerary teeth (test group). According to the CBCT data and the dentition model of the patients, the positioning guide plate was positioned by avoiding the important anatomical structure with the tooth-bone surface as the support to design the soft tissue incision line and bone tissue exposure range. The other 15 patients who were treated without the use of the guide plate for operation served as the control group. The design time, tooth searching time, operation time and complications were compared between the two groups.@*RESULTS@#The positioning guide plate was well attached during the operation and allowed quick location of the supernumerary teeth while helping to expose the supernumerary teeth and avoid the damage of the adjacent important anatomical structures. The pre-operative design time was 50 ± 5 min in the test group and 0 min in the control group. The average time of tooth finding in the test group was 5±2 min, as compared with 10±3 min in the control group (=15.40, < 0.01); the average time of operation was significantly shorter in the test group than in the control group (25±4 min 45±6 min; =35.50, < 0.01). No intraoperative complications occurred in the test group, and slight deviation occurred in one case in the control group.@*CONCLUSIONS@#The application of digital positioning guide plate in extraction of embedded supernumerary teeth can significantly shorten the time of tooth finding, reduce the difficulty of operation, and improve the quality of operation.

An in vitro comparative evaluation between virtually planned implant positions on interactive implant software versus actual implant positions achieved using sterolithographic open guide system

Purpose: To evaluate and compare the positional and angular accuracy of virtual implant positions planned on cone-beam computed tomography and final implant positions achieved using a universal open guide system. Materials and Methods: A dual scan of a partially edentulous jaw model along with prosthesis was done, and virtual implant planning was performed. Three implant positions in relation to 35, 36, and 37 were simulated (Group A). In total, 24 implants were placed in eight replaceable bone blocks (Group B) in the same region on the model using an open stereolithographic template. The linear positions and angulation of the placed implants were determined using Vision Measuring Machine. Deviations between virtually planned and surgically placed implants were analyzed in terms of linear and angular measurements. Data were analyzed with the independent-sample t-test with differences P ≤ 0.05 being considered statistically significant. Results: The linear distance (mean ± standard deviation [SD]) in mesiodistal direction between implants in relation to 35 and 36, 36 and 37, 35 and 37 in Group A was 8.79 ± 0 mm, 8.71 ± 0 mm, and 17.50 ± 0 mm, respectively, and in Group B was 7.70 ± 0.58 mm, 8.11 ± 0.30 mm, and 15.80 ± 0.48 mm. All these above values were found to be statistically significant (P ≤ 0.05). The linear distance (mean ± SD) in the vertical direction (mesial) for implants placed in the region of 35, 36, 37 for Group A was 1.51 ± 0 mm, 1.51 ± 0 mm, and 2.47 ± 0 mm, respectively, and for Group B was 1.37 ± 0.32 mm, 1.65 ± 0.48 mm, and 1.79 ± 0.36 mm, respectively. The linear distance (mean ± SD) in the vertical direction (distal) for implants placed in the region of 35, 36, 37 for Group A was 3.37 ± 0 mm, 1.51 ± 0 mm, and 1.51 ± 0 mm, respectively, and for Group B was 1.86 ± 0.48 mm (P ≤ 0.05), 1.56 ± 0.23 mm, and 1.29 ± 0.39 mm (P ≤ 0.05), respectively. The angular deviation (perpendicularity) values for virtually planned implants (Group A) were 90.00° ± 0° and for implants placed in the region of 35, 36, and 37 (Group B) were 84.52° ± 5.4°, 83.57° ± 1.52°, and 80.41° ± 2.37°, respectively, which are highly significant (P ≤ 0.05). Conclusions: The stereolithographic universal open guide used in the study may be considered accurate for placement of implants in mesiodistal position and also in terms of perpendicularity but not in the vertical position. Stereolithographic open guide may be recommended for more accurate implant position, especially for the placement of multiple implants.

Morphometric Analysis of the Human Second Cervical Vertebrae of North Indian Population

Introduction: The Aim of the study was to provide the morphometric measurement of the axis vertebrae in North Indian popuulation. Which could be used as clinical tool to determine the feasibility of safe translaminar screw placement. Subjects and Methods: 50 dry human axis vertebrae from adult North Indian population were subjected to morphometric measurement using venier caliper. The various dimensions of the axis vertebrae were observed. Results: There is high variability in the thickness of the C2 lamina. As compared to western population, the axis bones used in the present study had smaller profiles. Conclusion: The current study showed safety margin for translaminar screw insertion is low.

Evaluation of CT angiography vascular localization combined with refined three-dimensional printing in guiding the resection and reconstruction of complex oral cancer / 中华肿瘤杂志

Objective@#To evaluate the effect of vascular localization using computerized tomography angiography (CTA) combined with refined three dimensional (3D) printing in guiding the resection and reconstruction of complex oral cancer.@*Methods@#From December 2013 to July 2017, the clinical data of 30 patients with complex oral cancer enrolled in the Hunan Cancer Hospital were retrospectively analyzed. 15 patients received CTA+ 3D assisted surgery, while the other 15 patients underwent traditional surgery. In CTA+ 3D assisted surgery group, CT and Magnetic Resonance Imaging (MRI) data were combined with CTA to print refined solid 3D model and surgical guide plate. The preoperative and intraoperative virtual surgical system and the operative experience were combined for preoperative evaluation and surgery. In traditional surgery group, preoperative evaluation and surgery were performed according to imaging data and surgeons′ clinical experience. Operative time, intraoperative blood loss, hospital stay and local recurrence rate were compared between the two groups.@*Results@#In CTA+ 3D assisted surgery group, one patient gave up surgical treatment after intuitively watching the lesion through the 3D model, and the remaining 14 patients underwent surgery as planned. All the 15 patients in traditional surgery group received surgery. But the preoperative plans of three patients were temporarily and passively modified due to insufficient preoperative evaluation. The average intraoperative blood loss was(320.1±27.2)ml in CTA+ 3D assisted surgery group and(430.2±30.3)ml in traditional surgery group. Mean operation time was(440.3±19.2)min and(552.2±23.3)min, respectively. Mean hospitalization time was (20.4±3.2)d and (25.1±3.7)d, respectively. The differences were all statistically significant (all P<0.05). 1 year and 3 years local recurrence rates were 9.1% and 28.6% in CTA+ 3D assisted surgery group, as well as 14.3% and 50.4% in traditional surgery group with statistical significance (P<0.05).@*Conclusion@#For complex oral cancer patients with difficulty in opening the mouth or postoperative recurrence, CTA vascular localization combined with fine 3D printing technology has significant advantages in the surgical process, surgical effect and postoperative evaluation index compared with traditional method using imaging data and clinical experience.

Application of digital implant guide plate in oral implant restoration / 口腔疾病防治

@#Digital implant guides have enabled "repair-oriented" implant restoration to become a reality by allowing an implant to be designed for an ideal site, maximizing the use of existing alveolar bone, and increasing the predictability of the restorative effect. This paper reviews the classification of digital guides and the related factors affecting the accuracy of digital guides to provide a reference for clinical doctors in practical applications. Digital guides can be divided into the categories of mucosal support, bone support, dental support and mixed support according to the retention mode. The manufacture and use of digital implant guides involve a series of processes, such as data acquisition, design and manufacture of the implant guide, and guided surgery. The accuracy of digital implant guides depends on all accumulated and interactive errors involved in the process from data acquisition to surgery. According to the process of guide plate fabrication and implant placement, errors in all aspects can be reduced to improve the accuracy of guide plate application.

Implant overdenture of mandible with severe unilateral atrophy: Report of two cases / 대한치과보철학회지

There are several unfavorable conditions regarding alveolar bone condition that may compromise the denture patient's satisfaction. Chewing efficiency may not be satisfactory when alveolar bone is deficient, and the denture stability could hardly be achieved when alveolar bone shape is irregular. Implant overdenture can be useful to provide satisfactory denture experience compared to conventional denture. The attachment for implant overdenture can be classified into bar attachment and solitary attachment. When the positions of the implants are in the mandibular anterior region, bar attachment may be favorable to obtain a rigid support of the entire denture. When implants are distributed both on anterior and posterior region, a solitary attachment could be considered for ease of removal and maintenance. This report presents implant overdenture cases with the patients that had unilateral mandibular alveolar bone atrophy conditions. Different abutments were chosen based on the individual patient's mandibular alveolar bone condition and the treatments were successful in terms of patient satisfaction.

Flapless implant placement with digital 3D imaging and planning system in fully edentulous patient: A case report and 5-year follow-up / 대한치과보철학회지

One of the fastest growing segments of implant dentistry is the utilization of computed tomography (CT) scan data and treatment planning software in conjunction with guided surgery for implant reconstruction cases. Computer assisted planning systems and associated surgical templates have established a predictable, esthetic, functional technique for placing and restoring implants. Especially, a philosophy of restoratively driven implant placement has been generally adopted. Recently, a variety of commercial dental fields have released their scanning and fabricating protocols and methods for restorations. This process is still being investigated and developed for the most precise and predictable outcome. This case report describes a female patient who wanted dental implants in fully edentulous areas. Restoratively driven implant placements were performed with surgical guide and the patient was fully satisfied with the clinical results, and at 5-year post restorative follow-up assessment, both implant and prosthesis were proved clinical success.

A new minimally invasive guided endodontic microsurgery by cone beam computed tomography and 3-dimensional printing technology

Endodontic microsurgery is defined as the treatment performed on the root apices of an infected tooth, which was unresolved with conventional root canal therapy. Recently, the advanced technology in 3-dimensional model reconstruction based on computed tomography such as cone beam computed tomography has opened a new avenue in application of personalized, accurate diagnosis and has been increasingly used in the field of dentistry. Nevertheless, direct intra-oral localization of root apex based on the 3-dimensional information is extremely difficult and significant amount of bone removal is inevitable when freehand surgical procedure was employed. Moreover, gingival flap and alveolar bone fenestration are usually required, which leads to prolonged time of surgery, thereby increasing the chance of trauma as well as the risk of infection. The purpose of this case report is to present endodontic microsurgery using the guide template that can accurately target the position of apex for the treatment of an anterior tooth with calcified canal which was untreatable with conventional root canal therapy and unable to track the position of the apex due to the absence of fistula.

Three Dimensional Printing Technique and Its Application to Bone Tumor Surgery / 대한정형외과학회잡지

Orthopaedics is an area where 3-dimensional (3D) printing technology is most likely to be utilized because it has been used to treat a range of diseases of the whole body. For arthritis, spinal diseases, trauma, deformities, and tumors, 3D printing can be used in the form of anatomical models, surgical guides, metal implants, bio-ceramic body reconstruction, and orthosis. In particular, in orthopaedic oncology, patients have a wide variety of tumor locations, but limited options for the limb salvage surgery have resulted in many complications. Currently, 3D printing personalized implants can be fabricated easily in a short time, and it is anticipated that all bone tumors in various surgical sites will be reconstructed properly. An improvement of 3D printing technology in the healthcare field requires close cooperation with many professionals in the design, printing, and validation processes. The government, which has determined that it can promote the development of 3D printing-related industries in other fields by leading the use of 3D printing in the medical field, is also actively supporting with an emphasis on promotion rather than regulation. In this review, the experience of using 3D printing technology for bone tumor surgery was shared, expecting orthopaedic surgeons to lead 3D printing in the medical field.